Factory Direct: DKGB2-500-2V500AH Sealed Gel Lead Acid Battery

1. Charging efficiency: The usage of imported low resistance raw materials and advanced process help make theinternal resistance smaller and the acceptance ability of small current charging stronger. 2. High and low temperature tolerance: Wide temperature range (lead-acid:-25-50 C ,and gel:-35-60 C), suitablefor indoor and outdoor use in varies environments. 3. Long cycle-life: The design life of lead acid and gel series reach to more than 15 and 18 years respectively, forthe arid is corrosion- resistant. and electrolvte is without risk of stratification by using multiple rare-earth alloy ofindependent intellectual property rights, nanoscale fumed silica imported from Germany as base materials, andelectrolyte of nanometer colloid all by independent research and development. 4. Environment-friendly: Cadmium (Cd), which is poisonous and not easy to recycle, does not exist. Acid leakageof gel electrolvte will not happen. The battery operates in safety and environmental protection. 5. Recovery performance: The adoption of special alloys and lead paste formulations make a low self-dischargerate, good deep discharge tolerance, and strong recover capability.

Model	Voltage	Capacity	Weight	Size
DKGB2-100	2v	100Ah	5.3kg	17171205*205mm
DKGB2-200	2v	200Ah	12.7kg	171110325*364mm
DKGB2-220	2v	220Ah	13.6kg	171110325*364mm
DKGB2-250	2v	250Ah	16.6kg	170150355*366mm
DKGB2-300	2v	300Ah	18.1kg	170150355*366mm
DKGB2-400	2v	400Ah	25.8kg	210171353*363mm
DKGB2-420	2v	420Ah	26.5kg	210171353*363mm
DKGB2-450	2v	450Ah	27.9kg	241172354*365mm
DKGB2-500	2v	500Ah	29.8kg	241172354*365mm
DKGB2-600	2v	600Ah	36.2kg	301175355*365mm
DKGB2-800	2v	800Ah	50.8kg	410175354*365mm
DKGB2-900	2v	900AH	55.6kg	474175351*365mm
DKGB2-1000	2v	1000Ah	59.4kg	474175351*365mm
DKGB2-1200	2v	1200Ah	59.5kg	474175351*365mm
DKGB2-1500	2v	1500Ah	96.8kg	400350348*382mm
DKGB2-1600	2v	1600Ah	101.6kg	400350348*382mm
DKGB2-2000	2v	2000Ah	120.8kg	490350345*382mm
DKGB2-2500	2v	2500Ah	147kg	710350345*382mm
DKGB2-3000	2v	3000Ah	185kg	710350345*382mm

Lead ingot raw materials

Polar plate process

Electrode welding

Assemble process

Sealing process

Filling process

Charging process

Storage and shipping

Battery product features: 1. The design of water free and simple maintenance overcomes the phenomenon of electrolytic water loss during the charging process of the battery. The volume and specific gravity of the electrolyte have almost no change during the use of the battery. Therefore, during the service life of the battery, water is replenished and maintenance is simple. 2. The battery is sealed safely and installed simply. There is no flowing electrolyte in the battery. The battery can be installed vertically or horizontally. There is no electrolyte leakage. In addition, the battery will not produce acid mist during normal charging. Therefore, the battery can be installed in the office or supporting equipment room, and * another battery room can be built to reduce the project cost. 3. The lead calcium alloy grid with good corrosion resistance is used for long service life. Under the ambient temperature of 25 ° C, the normal floating charge life can reach more than 10 years. 4. The high power discharge performance is good. The * plate and glass fiber separator with small internal resistance value are used, and the assembly is tight, making the internal resistance of the battery small. The output power of high current discharge in the temperature range of - 40C~60 is about 15% higher than that of conventional batteries. 4. Easy to install and use The battery has been charged when leaving the factory, and can be installed and put into use after the user gets the battery. Precautions for battery installation. There are also many precautions when installing the battery. Let's make a specific analysis as follows: 1. It is forbidden to use the ups battery upside down. 2. Do not give abnormal vibration and impact on the battery. 3. Pay attention to insulation during installation. 4. Do not install the machine into a closed structure. 5. During installation, pay attention to keeping a certain distance between batteries to ensure air circulation. 6. Please do not mix different types of batteries. 7. Do not allow the ups battery to contact metal.